DATACONVERT.DAT
From BAWiki
Basic Information
File-Type
dataconvert.dat
File-Form
FORMATTED
Version
9.x / May 2011
Description-Date
May 2011
Significance of the File
Contains various input steering data for the postprocessor DATACONVERT
File-Contents (in Catchwords)
Contains various input steering data, which are required during
- mode 1 , conversion of computational results for the integrated modelling system Delft3D. Original data are stored in NetCDF data files and are going to be converted and written to BAW-specific BDF data files, or,
- mode 2 , conversion of (DWD) NetCDF files to BAW-specific BDF data files, or,
- mode 3 , merge of several (DWD) NetCDF files to a single NetCDF data file (times for input data must be identical in all input files), or
- mode 4 , conversion of BDF data files into a single NetCDF data file using CF Metadata conventions,
- mode 6: conversion of meteorological data in BDF-Format into Delft3D format METEO_DLFT
informations related to output files (block Output_Information)
- mode 1
- file to store converted depth averaged (2D-) computational results (filetype dirz.bin.r, dirz.bin.i and dirz.bin).
- Notice: data for multiple computational domains are going to be gathered and stored in this file.
- file to store the converted computational grid (filetype untrim_grid.dat).
- Notice: computational grid data for multiple computational domains are going to be gathered and stored in this grid file.
- (optional) file to store converted depth dependent (3D-) computational results (filetype dirz.bin.r, dirz.bin.i and dirz.bin).
- Notice: data for multiple computational domains are going to be gathered and stored in this file.
- (optional) file with description of the vertical layer structure (z-layers), to be used for the converted computational results (filetype vertical.dat).
- Notice: this file must be always specified in situations when three-dimensional data are going to be generated by conversion.
- (optional) threshold depth for drying and wetting.
- Notice: the value prescribed shall be not smaller than the one used during the Delft3D simulation.
- (optional) start time for data conversion.
- Notice: if not specified the first date contained in the input data will be used.
- (optional) end time for data conversion.
- Notice: if not specified the last date contained in the input data will be used.
- (optional) time step for data conversion.
- Notice: if not specified all dates contained in the input data will be converted.
- (optional) maximum increase of depth during a morphodynamic simulation. Depth at all grid points is increased by this amount to cover depth variation due to morphodynamics within a z-layered (vertical) grid. Exception: depths at (protected) structures will not be altered.
- Notice: if this parameter is not prescribed all depth values will remain unchanged.
- (optional) steering parameter for the method chosen to compute initial depth values at grid points. Depths can be computed from values prescribed in grid files or in computational result files.
- Notice: if this parameter is not prescribed, depth values are derived from grid data only.
- (optional) steering parameter for type of method used to compute depth values for new edges inserted during the grid refinement process. Method can be either MEAN, MAX or MIN.
- Notice: if this parameter is missing, method MEAN will be used.
- (optional) steering parameter for rounding of time and date information (digits for nanoseconds). The number of digits for nanoseconds (0 - 9) has to be prescribed. In case 0 (zero) is prescribed, no digits for nanoseconds are taken into account and all internal time and date items are rounded to seconds.
- Notice: if this parameter is not specified, no time and date item will be subject to rounding (full accuracy).
- file to store converted depth averaged (2D-) computational results (filetype dirz.bin.r, dirz.bin.i and dirz.bin).
- mode 2
- file to store converted data (filetype dirz.bin.r, dirz.bin.i and dirz.bin).
- Notice: file is not generated, only the filetype is used.
- file to store the converted computational grid (filetype gitter05.dat or gitter05.bin).
- Notice: file is not generated, only filetype is used.
- (optional) start time for data conversion.
- Notice: if not specified the first date contained in the input data will be used.
- (optional) end time for data conversion.
- Notice: if not specified the last date contained in the input data will be used.
- (optional) time step for data conversion.
- Notice: if not specified all dates contained in the input data will be converted.
- (optional) steering parameter for rounding of time and date information (digits for nanoseconds). The number of digits for nanoseconds (0 - 9) has to be prescribed. In case 0 (zero) is prescribed, no digits for nanoseconds are taken into account and all internal time and date items are rounded to seconds.
- Notice: if this parameter is not specified, no time and date item will be subject to rounding (full accuracy).
- EPSG code for coordinates of resulting grid file (see EPSG Geodetic Parameter Registry).
- file to store converted data (filetype dirz.bin.r, dirz.bin.i and dirz.bin).
- mode 3
- file to store merged data (filetype netcdf.cdf).
- (optional) start time for data conversion.
- Notice: if not specified the first date contained in the input data will be used.
- (optional) end time for data conversion.
- Notice: if not specified the last date contained in the input data will be used.
- (optional) time step for data conversion.
- Notice: if not specified all dates contained in the input data will be converted.
- (optional) steering parameter for rounding of time and date information (digits for nanoseconds). The number of digits for nanoseconds (0 - 9) has to be prescribed. In case 0 (zero) is prescribed, no digits for nanoseconds are taken into account and all internal time and date items are rounded to seconds.
- Notice: if this parameter is not specified, no time and date item will be subject to rounding (full accuracy).
- mode 4
- file to store merged data (filetype cf-netcdf.nc).
- (optional) start time for data conversion.
- Notice: if not specified the first date contained in the input data will be used.
- (optional) end time for data conversion.
- Notice: if not specified the last date contained in the input data will be used.
- (optional) time step for data conversion.
- Notice: if not specified all dates contained in the input data will be converted.
- (optional) title (corresponds to global CF attribute title).
- (optional) comment (corresponds to global CF attribute comment).
- (optional) source (corresponds to global CF attribute source).
- (optional) creation mode ID for a CF NetCDF file (see Unidata NetCDF).
- (optional) deflate_level for a CF-NetCDF file (see Unidata NetCDF).
- Notice: For further informations on global CF attributes see NetCDF global attributes.
- mode 6
- file to store converted data (filetype METEO_DLFT)
- (optional) start time for data conversion.
- Notice: if not specified the first date contained in the input data will be used.
- (optional) end time for data conversion.
- Notice: if not specified the last date contained in the input data will be used.
- (optional) time step for data conversion.
- Notice: if not specified all dates contained in the input data will be converted.
- (optional) EPSG code for coordinates of resulting grid file (see EPSG Geodetic Parameter Registry).
- Notice: There will be be no mapping, but the code will be written as a comment into the METEO_DELFT file.
- (optional) No_Data_Value for invalid data.
- (optional) Timezone for the time string of the output file (Default: UTC)
informations related to input files (block Input_Files) - block can be specified several times
- mode 1
- name of NetCDF-file which contains the computational results from Delft3D going to be converted (filetype netcdf.cdf);
- Notice: has to be specified only once per computational domain), plus (optional) code numbers for the converted physical quantities (Notice: in case code numbers are not specified, all quantities which are feasible for conversion are going to be converted automatically).
- name of file which contains the computational grid going to be converted (filetype delft3d.grd).
- Additionally the following files of type delft3d.dep and delft3d.enc must be present in the working directory.
- Optionally files of type delft3d.dry, delft3d.thd, delft3d.lwl, delft3d.ext as well as delft3d.bnd may be present in the working directory.
- Remark 1: Only one file with extension grd per computational domain can be specified. The other (related) files are only allowed to differ with respect to their extension.
- Remark 2: For each computational domain the converted computational grid as well as the converted computational results are stored in files of type untrim_grid.dat, dirz.bin.r, dirz.bin.i and dirz.bin.
- name of NetCDF-file which contains the computational results from Delft3D going to be converted (filetype netcdf.cdf);
- mode 2
- name of NetCDF-file with data to be converted (filetype netcdf.cdf);
- Remark 1: For each input file a grid file of type gitter05.dat or gitter05.bin as well as data files of type dirz.bin.r, dirz.bin.i and dirz.bin will be generated.
- EPSG code for coordinates in input data file (see EPSG Geodetic Parameter Registry).
- name of NetCDF-file with data to be converted (filetype netcdf.cdf);
- mode 3
- file name with type netcdf.cdf, contents will be merged into the output file.
- mode 4
- BDF data file of type dirz.bin.
- Remarks:
- Files of type dirz.bin.I and dirz.bin.R must be also available.
- Valid data types:
- Synoptic data.
- Valid grid types:
- location_grid.dat or cf-netcdf.nc from GRIDCONVERT.
- gitter05.dat and gitter05.bin or cf-netcdf.nc from GRIDCONVERT.
- untrim_grid.dat or cf-netcdf.nc from GRIDCONVERT.
- Remarks:
- BDF data file of type dirz.bin.
- mode 6
- data files of type dirz.bin.r, dirz.bin.i and dirz.bin
- alle grid formats connectable with BDF files, e.g. GITTER05
dictionary-file hyd_untrim_dico.dat, normally present in directory $PROGHOME/dic/, will be automatically read by the application program in addition to the user-specified input file.
Programs using this Type of File
Example-File
please refer to $PROGHOME/examples/dataconvert/.
- mode 1 : dataconvert.Delft3D-NetCDF.BDF.dat.
- mode 2 : dataconvert.DWD-NetCDF.BDF.dat.
- mode 3 : dataconvert.DWD-NetCDF.DWD-NetCDF.dat.
- mode 4 : dataconvert.BDF.CF-NetCDF.dat.
- mode 6 : dataconvert.BDF-METEO_DELFT.dat.
back to: File Descriptions