TDKLF

Basic Information

Name of Program

TDKLF

Version-Date

8.x / September 2009

Description-Date

September 2009

Catchwords

postprocessor
analysis of numerically calculated results (2D/3D, profile-data as well as data at specific locations)
tidal characteristic numbers of bed load transport (several sediment fractions)
tidal characteristic numbers of eff. bed shear stress action
estuaries
static (alternative bathymetry)
universal direct access data format for 2D/3D-data
universal direct access data format for profile-data
universal direct access format for data at specific locations

Short Description of Functionality

The program TDKLF is a postprocessor for different numerical models (e.g. TRIM-2D, TRIM-3D, TELEMAC-2D, UNTRIM2007 etc.). TDKLF automatically computes some tidal characteristic numbers of bed load transport or eff. bed shear stress action for a given set of results (universal direct access data format). The results of TDKLF analyses may be visualized/displayed with the graphical postprocessors HVIEW2D (for 2D/3D-data) or LQ2PRO (for profile-data).

Within the period of data analysis the following tidal characteristic numbers of bed load transport are calculated (some numbers are optionally calculated):

• Flood Current

• bed load transport due to flood current

• Ebb Current

• bed load transport due to ebb current

• Tidal Cycle

• residual bed load transport during a tidal cycle
• ratio bed load transport due to flood current : bed load transport due to ebb current

Several fractions of sediment can be treated at the same time.

Within the period of data analysis the following tidal characteristic numbers of eff. bed shear stress action are calculated (some numbers are optionally calculated):

• Flood Current

• action of eff. bed shear stress due to flood-current

• Ebb Current

• action of eff. bed shear stress due to ebb-current

• Tidal Cycle

• residual action of the eff. bed shear stress
• ratio between flood- and ebb-current-induced action of the eff. bed shear stress

Notice: the word action is used above synonymously for integration over time of the eff. bed shear stress.

For each characteristic number of bed load transport the following values are being calculated for the period of data analysis:

1. Characteristic value for each tide within the period of data analysis
2. Mean value for the period of data analysis
3. Maximum value for the period of data analysis
4. Minimum value for the period of data analysis

Input-Files

1. general input data (filetype tdklf.dat)
2. synoptic data which shall be analysed (files of type dirz.bin.r, dirz.bin.i und dirz.bin)
3. grid for 2D/3D-data (filetype gitter05.dat/bin or filetype selafin or filetype untrim_grid.dat)

or profile-topography for profile-data (filetype profil05.bin)

or system file for specific locations (filetype location_grid.dat)

Output-Files

1. results of data analyses (files of type dirz.bin.r, dirz.bin.i und dirz.bin)
2. informative printer file (filetype Tdklf.sdr)
3. (optional) trace of program execution (filetype Tdklf.trc)

Methodology

At first some extreme events (HW and LW) for the water level are determined together with the times for slack water (ebb slack and flood slack) for a network of reference locations for each tidal cycle. This ensures the phase-correct ordering of the events for all nodes of the computational grid respectively profile-topography. Thereafter the tidal characteristic numbers are calculated at all nodal points, using the formerly calculated results at the reference locations. To obtain a more precise calculation of the times and values for all tidal characteristic numbers a spline interpolation is used to interpolate between equidistant time series data (water level, current velocity and bed load transport rate or eff. bed shear stress) at each nodal point. Drying and wetting of tidal flats is taken into account by the algorithm.

Program(s) to run before this Program

DIDARENAME, DIDASPLIT, ZEITR

Program(s) to run after this Program

ABDF, DIDARENAME, DIDASPLIT, GVIEW2D, HVIEW2D, LQ2PRO, VTDK, VVIEW2D, XTRDATA

Additional Information

Language

Fortran90

Additional software

-

Original Version

G. Lang

Maintenance

G. Lang, S. Spohr

Documentation/Literature

please refer to $PROGHOME/examples/Tdklf/

---

back to Program Descriptions

---

Overview