UNTRIM HYD.DAT: Difference between revisions

Latest revision as of 13:17, 11 June 2010

Basic Information

File-Type

untrim_hyd.dat

File-Form

FORMATTED

Version

7.x / July 2003

Description-Date

November 2003

Significance of the File

contains specific input data related to the physical subsystem Hydrodynamics, Salt-, Temperature- and Suspended-Sediment-Transport of program UNTRIM.

File-Contents (in Catchwords)

model type for calculation or provison of hydrodynamics as well as salt and or temperature transport the following methods are possible:
1. No_Hydrodynamic_Model
;

2. Read_Hydrodynamic_Data_From_File
;

3. Untrim_Hydrodynamic_Model
: the three-dimensional numerical model UNTRIM will be applied.
existing files for hydrodynamics, salinity, temperature and suspended load when method Read_Hydrodynamic_Data_From_File was selected.
times, if the global default values which have been specified in a file of type untrim_main.dat shall be replaced by the values specified for this physical submodel; the following specifications are possible:
- control of simulation (period and time step);
- area-/volume oriented output of results;
- profile oriented output of results;
- output for specific locations;
- output of restart data.
name and type of different input files; the following specifications are possible:
- file with horizontal grid (filetype untrim_grid.dat);
- file with vertical grid structure, which specifies the boundaries between vertical layers (filetype vertical.dat);
- (optional) file with profile topography (filetype profil05.bin);
- (optional) file with a list of specific locations (filetype location.dat);
- (optional) initial condition for hydrodynamics, salinity, temperature and suspended load (filetype dirz.bin.r, dirz.bin.i and dirz.bin); in addition to the name of the file also date and time for the initial condition must be prescribed.
Notice: for a three-dimensional simulation the results of a previous two-dimensional simulation can be used too.
- (optional) alternative initial condition for salinity (filetype dirz.bin.r, dirz.bin.i and dirz.bin); in addition to the name of the file also date and time for the initial condition must be prescribed.
Notice: for a three-dimensional simulation the results of a previous two-dimensional simulation can be used too.
- (optional) alternative initial condition for temperature (filetype dirz.bin.r, dirz.bin.i and dirz.bin); in addition to the name of the file also date and time for the initial condition must be prescribed.
Notice: for a three-dimensional simulation the results of a previous two-dimensional simulation can be used too.
- (optional) alternative initial condition for suspended load (filetype dirz.bin.r, dirz.bin.i and dirz.bin); in addition to the name of the file also date and time for the initial condition must be prescribed.
Notice: for a three-dimensional simulation the results of a previous two-dimensional simulation can be used too.
- (optional) description of soil identification numbers (filetype soil.dat);
name and type of different boundary data files;
- (optional) boundary data hydrodynamics (filetype dirz.bin.r, dirz.bin.i and dirz.bin);
- (optional) boundary data for salinity (filetype dirz.bin.r, dirz.bin.i and dirz.bin);
- (optional) boundary data for temperature (filetype dirz.bin.r, dirz.bin.i and dirz.bin);
- (optional) boundary data for suspended load (filetype dirz.bin.r, dirz.bin.i and dirz.bin);
- (optional) boundary data for control of weirs (not implemented at the moment);
- (optional) discharge and salinity for sources (filetype dirz.bin.r, dirz.bin.i and dirz.bin);
- (optional) discharge for sinks (filetype dirz.bin.r, dirz.bin.i and dirz.bin).
Notice: aforementioned files may be generated using program UTRRND.
name and type of different output files; the following specifications are possible:
- area oriented output of computed results (two-dimensional) in the overall model domain or in a tile (each of the subsequent files can be optionally specified):
water level elevation (filetype dirz.bin.r, dirz.bin.i and dirz.bin);

depth averaged current velocity (filetype dirz.bin.r, dirz.bin.i and dirz.bin);

depth averaged salinity (filetype dirz.bin.r, dirz.bin.i and dirz.bin).

depth averaged temperature (filetype dirz.bin.r, dirz.bin.i and dirz.bin).

depth averaged suspended load (filetype dirz.bin.r, dirz.bin.i and dirz.bin).
- volume oriented output of computed results (three-dimensional) in the overall model domain or in a tile (each of the subsequent files can be optionally specified):
current velocity (filetype dirz.bin.r, dirz.bin.i and dirz.bin);

salinity (filetype dirz.bin.r, dirz.bin.i and dirz.bin).

temperature (filetype dirz.bin.r, dirz.bin.i and dirz.bin).

suspended load (filetype dirz.bin.r, dirz.bin.i and dirz.bin).
- (optional) output along profiles of computed results (depth-averaged data) along selected predefined profiles:
water level elevation,

depth averaged current velocity,

depth averaged salinity,

depth averaged temperature,

depth averaged suspended load,

depth averaged density,

depth averaged hydrodynamic pressure and

depth averaged vertical viscosity.

bottom shear stress
(filetype dirz.bin.r, dirz.bin.i and dirz.bin);

Notice: These files will be initialized with standard values immediately after opening.
- (optional) output along profiles of computed results (three-dimensional data) along selected predefined profiles:
current velocity,

salinity,

temperature,

suspended load,

density,

hydrodynamic pressure and

vertical viscosity.
(filetype dirz.bin.r, dirz.bin.i and dirz.bin);

Notice: These files will be initialized with standard values immediately after opening.
- (optional) output of results for specific locations, i.e. for water level elevation and depth averaged data:
water level elevation,

depth averaged current velocity,

depth averaged salinity,

depth averaged temperature,

depth averaged suspended load,

depth averaged density,

depth averaged hydrodynamic pressure and

depth averaged vertical viscosity.

bottom shear stress
(filetype dirz.bin.r, dirz.bin.i and dirz.bin).

Notice: Files contain synoptic data sets. Time series informations for specific locations can be obtained applying the program ZEITR on these data; These files will be initialized with standard values immediately after opening.
- (optional) output of results for specific locations, i.e. for three-dimensional data:
current velocity,

salinity,

temperature,

suspended load,

density,

hydrodynamic pressure and

vertical viscosity.
(filetype dirz.bin.r, dirz.bin.i and dirz.bin).

Notice: Files contain synoptic data sets. Time series informations for specific locations can be obtained applying the program ZEITR on these data; These files will be initialized with standard values immediately after opening.
- (optional) restart-data for hydrodynamics, salinity, temperature and suspended load (filetype dirz.bin.r, dirz.bin.i and dirz.bin). Notice: these files contain consistent synoptic data sets for the staggered computational grid and can therefore be used as initial conditions for a subsequent simulation; because they are defined on a staggered grid they cannot be used in conventional postprocessing programs.
specifications for horizontal grid geometry control:
- minimum distance between centers of elements which are adjacent to one edge.
salt transport scheme:
- no salt transport, and
- simulate transport of salt.
temperature transport scheme:
- no temperature transport, and
- simulate transport of temperature.
suspended load transport scheme:
- no suspended load transport, and
- simulate transport of suspended load.
approximation of pressure:
- non-hydrostatic pressure, and
- hydrodynamic pressure.
approximation for horizontal viscosity/diffusivity
- no horizontal exchange, and
- constant (isotropic) horizontal exchange.
approximation for vertical viscosity/diffusivity
- no vertical exchange,
- constant vertical exchange, and
- k-eps equlibrium model, Rodi (1984).
approximation for Coriolis-acceleration
- no Coriolis acceleration, and
- constant Coriolis acceleration (f-plane approximation).
approximation for wall friction
- free slip,
- partial slip, and
- no slip.
flux limiter for scalar transport:
- no flux limiter
- Minmod
- van Leer
- Superbee

Notice:

dictionary-file hyd_untrim_dico.dat, normally present in directory $PROGHOME/dic/, will be automatically read by the application program in addition to the user-specified input file.
furthermore the following configuration files stored in the directory $PROGHOME/cfg/ are eventually automatically read by the program:

all_2d_water_level.dat
all_2d_velocity.dat
all_2d_salinity.dat
all_2d_temperature.dat
all_2d_suspended_load.dat
all_3d_velocity.dat
all_3d_salinity.dat
all_3d_temperature.dat
all_3d_suspended_load.dat
all_restart.dat
locations_2d.dat
locations_3d.dat
profiles_2d.dat
porfiles_3d.dat

Programs using this Type of File

UNTRIM

Example-File

please refer to $PROGHOME/examples/untrim/untrim_hyd.dat

back to: File Descriptions

Overview

@@ Line 34: / Line 34: @@
 #:Notice: for a three-dimensional simulation the results of a previous two-dimensional simulation can be used too.
 #* (optional) description of '''soil identification numbers''' (filetype [[SOIL.DAT|soil.dat]]);
-#* (optional) specification of one or more '''tile areas''' in situations when writing of computed results is restricted to '''sections or tiles''' of the overall modeling domain; (filetype [[List_of_tiles.dat]]).
 #name and type of different '''boundary data files''';
 #* (optional) boundary data '''hydrodynamics''' (filetype [[DIRZ.BIN.R|dirz.bin.r]], [[DIRZ.BIN.I|dirz.bin.i]]  and [[DIRZ.BIN|dirz.bin]]);
@@ Line 76: / Line 75: @@
 #::* '''hydrodynamic pressure''' and
 #::* '''vertical viscosity'''.
-#:(filetype dirz.bin.R, dirz.bin.I and dirz.bin);
+#:(filetype [[DIRZ.BIN.R|dirz.bin.r]], [[DIRZ.BIN.I|dirz.bin.i]]  and [[DIRZ.BIN|dirz.bin]]);
 #:Notice: These files will be initialized with standard values immediately after opening.
+#*(optional) output of results for specific locations, i.e. for water level elevation and depth averaged data:
+#::* '''water level elevation''',
+#::* '''depth averaged current velocity''',
+#::* '''depth averaged salinity''',
+#::* '''depth averaged temperature''',
+#::* '''depth averaged suspended load''',
+#::* '''depth averaged density''',
+#::* '''depth averaged hydrodynamic pressure''' and
+#::* '''depth averaged vertical viscosity'''.
+#::* '''bottom shear stress'''
+#:(filetype [[DIRZ.BIN.R|dirz.bin.r]], [[DIRZ.BIN.I|dirz.bin.i]]  and [[DIRZ.BIN|dirz.bin]]).
+#:Notice: Files contain synoptic data sets. Time series informations for specific locations can be obtained applying the program [[ZEITR]] on these data; These files will be initialized with standard values immediately after opening.
 #* (optional) output of '''results for specific locations''', i.e. for '''three-dimensional data''':
 #::* '''current velocity''',
@@ Line 86: / Line 97: @@
 #::* '''hydrodynamic pressure''' and
 #::* '''vertical viscosity'''.
-(filetype [[DIRZ.BIN.R|dirz.bin.r]], [[DIRZ.BIN.I|dirz.bin.i]]  and [[DIRZ.BIN|dirz.bin]]).
+#:(filetype [[DIRZ.BIN.R|dirz.bin.r]], [[DIRZ.BIN.I|dirz.bin.i]]  and [[DIRZ.BIN|dirz.bin]]).
 #:Notice: Files contain synoptic data sets. Time series informations for specific locations can be obtained applying the program [[ZEITR]] on these data; These files will be initialized with standard values immediately after opening.
 #* (optional) '''restart-data''' for '''hydrodynamics, salinity, temperature''' and '''suspended load''' (filetype [[DIRZ.BIN.R|dirz.bin.r]], [[DIRZ.BIN.I|dirz.bin.i]]  and [[DIRZ.BIN|dirz.bin]]). Notice: these files contain consistent synoptic data sets for the staggered computational grid and can therefore be used as initial conditions for a subsequent simulation; because they are defined on a staggered grid they cannot be used in conventional postprocessing programs.
 #specifications for '''horizontal grid geometry control''':
-#::* minimum distance between centers of elements which are adjacent to one edge.
+#:* minimum distance between centers of elements which are adjacent to one edge.
 #'''salt transport scheme''':
-#::* no salt transport, and
+#:* no salt transport, and
-#::* simulate transport of salt.
+#:* simulate transport of salt.
 #'''temperature transport scheme''':
-#::* no temperature transport, and
+#:* no temperature transport, and
-#::* simulate transport of temperature.
+#:* simulate transport of temperature.
 #'''suspended load transport scheme''':
-#::* no suspended load transport, and
+#:* no suspended load transport, and
-#::* simulate transport of suspended load.
+#:* simulate transport of suspended load.
 #'''approximation of pressure''':
-#::* non-hydrostatic pressure, and
+#:* non-hydrostatic pressure, and
-#::* hydrodynamic pressure.
+#:* hydrodynamic pressure.
 #'''approximation for horizontal viscosity/diffusivity'''
-#::* no horizontal exchange, and
+#:* no horizontal exchange, and
-#::* constant (isotropic) horizontal exchange.
+#:* constant (isotropic) horizontal exchange.
 #'''approximation for vertical viscosity/diffusivity'''
-#::* no vertical exchange,
+#:* no vertical exchange,
-#::* constant vertical exchange, and
+#:* constant vertical exchange, and
-#::* k-eps equlibrium model, Rodi (1984).
+#:* k-eps equlibrium model, Rodi (1984).
 #'''approximation for Coriolis-acceleration'''
-#::* no Coriolis acceleration, and
+#:* no Coriolis acceleration, and
-#::* constant Coriolis acceleration (f-plane approximation).
+#:* constant Coriolis acceleration (f-plane approximation).
 #'''approximation for wall friction'''
-#::* free slip,
+#:* free slip,
-#::* partial slip, and
+#:* partial slip, and
-#::* no slip.
+#:* no slip.
 #'''flux limiter for scalar transport''':
-#::* no flux limiter
+#:* no flux limiter
-#::* Minmod
+#:* Minmod
-#::* van Leer
+#:* van Leer
-#::* Superbee
+#:* Superbee
 '''Notice:'''
 * dictionary-file '''hyd_untrim_dico.dat''', normally present in directory '''$PROGHOME/dic/''', will be automatically read by the application program in addition to the user-specified input file.
 * furthermore the following configuration files stored in the directory '''$PROGHOME/cfg/''' are eventually automatically read by the program:
-::::*'''all_2d_water_level.dat'''
+:::*'''all_2d_water_level.dat'''
-::::*'''all_2d_velocity.dat'''
+:::*'''all_2d_velocity.dat'''
-::::*'''all_2d_salinity.dat'''
+:::*'''all_2d_salinity.dat'''
-::::*'''all_2d_temperature.dat'''
+:::*'''all_2d_temperature.dat'''
-::::*'''all_2d_suspended_load.dat'''
+:::*'''all_2d_suspended_load.dat'''
-::::*'''all_3d_velocity.dat'''
+:::*'''all_3d_velocity.dat'''
-::::*'''all_3d_salinity.dat'''
+:::*'''all_3d_salinity.dat'''
-::::*'''all_3d_temperature.dat'''
+:::*'''all_3d_temperature.dat'''
-::::*'''all_3d_suspended_load.dat'''
+:::*'''all_3d_suspended_load.dat'''
-::::*'''all_restart.dat'''
+:::*'''all_restart.dat'''
-::::*'''locations_2d.dat'''
+:::*'''locations_2d.dat'''
-::::*'''locations_3d.dat'''
+:::*'''locations_3d.dat'''
-::::*'''profiles_2d.dat'''
+:::*'''profiles_2d.dat'''
-::::*'''porfiles_3d.dat'''
+:::*'''porfiles_3d.dat'''
 |nutzerprogramme=
 [[UNTRIM]]