NetCDF Dreiecksgitter

Kurze Beschreibung

Ein aus Dreiecken aufgebautes Gitter wird beschrieben. Typische Dateitypen hierfür sind z. B. gitter05.dat und gitter05.bin sowie selafin. Es könnte sich aber auch um ein spezielles, ausschließlich aus Dreiecken aufgebautes Gitter des Typs untrim_grid.dat handeln. Die Speicherung von Daten auf diesem Gitter, also z. B. auch der Tiefe, wird an anderer Stelle beschrieben. Ebenso wird an dieser Stelle keine Information über offene oder geschlossene Kanten, Polygone an denen eventuell Randwerte vorgegeben werden sollen, aufgeführt. Es wird ausschließlich die Struktur des Gitters beschrieben.

Inhalt der Datei

Dimensionen

dimensions:

nMesh2_node = number of nodes (vertices) ;

nMesh2_edge = number of edges ;

nMesh2_poly = number of polygons (triangles) ;

Two = 2 ; \\ constant dimension

Three = 3 ; \\ constant dimension

Variablen

Lokale Koordinaten

Knoten

double Mesh2_node_x(nMesh2_node) ;

Mesh2_node_x:standard_name = "projection_x_coordinate" ;

Mesh2_node_x:long_name = "x-coordinate of 2D mesh nodes" ;

Mesh2_node_x:units = "m" ;

double Mesh2_node_y(nMesh2_node) ;

Mesh2_node_y:standard_name = "projection_y_coordinate" ;

Mesh2_node_y:long_name = "y-coordinate of 2D mesh nodes" ;

Mesh2_node_y:units = "m" ;

Kanten

double Mesh2_edge_x(nMesh2_edge) ;

Mesh2_edge_x:standard_name = "projection_x_coordinate" ;

Mesh2_edge_x:long_name = "x-coordinate of 2D mesh edges, e.g. center of edge" ;

Mesh2_edge_x:units = "m" ;

double Mesh2_edge_y(nMesh2_edge) ;

Mesh2_edge_y:standard_name = "projection_y_coordinate" ;

Mesh2_edge_y:long_name = "y-coordinate of 2D mesh polygons, e.g. center of edge" ;

Mesh2_edge_y:units = "m" ;

Polygone

double Mesh2_poly_x(nMesh2_poly) ;

Mesh2_poly_x:standard_name = "projection_x_coordinate" ;

Mesh2_poly_x:long_name = "x-coordinate of 2D mesh polygons, e.g. center of gravity" ;

Mesh2_poly_x:units = "m" ;

double Mesh2_poly_y(nMesh2_poly) ;

Mesh2_poly_y:standard_name = "projection_y_coordinate" ;

Mesh2_poly_y:long_name = "y-coordinate of 2D mesh polygons, e.g. center of gravity" ;

Mesh2_poly_y:units = "m" ;

Geografische Koordinaten

Knoten

double Mesh2_node_lon(nMesh2_node) ;

Mesh2_node_lon:standard_name = "longitude" ;

Mesh2_node_lon:long_name = "longitude of 2D mesh nodes" ;

Mesh2_node_lon:units = "degrees_east" ;

double Mesh2_node_lat(nMesh2_node) ;

Mesh2_node_lat:standard_name = "latitude" ;

Mesh2_node_lat:long_name = "latitude of 2D mesh nodes" ;

Mesh2_node_lat:units = "degrees_north" ;

Kanten

double Mesh2_edge_lon(nMesh2_edge) ;

Mesh2_edge_lon:standard_name = "longitude" ;

Mesh2_edge_lon:long_name = "longitude of 2D mesh edges, e.g. center of edge" ;

Mesh2_edge_lon:units = "degrees_east" ;

Mesh2_edge_lon:bounds = "Mesh2_edge_lon_bnd"

double Mesh2_edge_lat(nMesh2_edge) ;

Mesh2_edge_lat:standard_name = "latitude" ;

Mesh2_edge_lat:long_name = "latitude of 2D mesh edges, e.g. center of edge" ;

Mesh2_edge_lat:units = "degrees_north" ;

Mesh2_edge_lat:bounds = "Mesh2_edge_lat_bnd"

Polygone

double Mesh2_poly_lon(nMesh2_poly) ;

Mesh2_poly_lon:standard_name = "longitude" ;

Mesh2_poly_lon:long_name = "longitude of 2D mesh polygons, e.g. center of gravity" ;

Mesh2_poly_lon:units = "degrees_east" ;

double Mesh2_poly_lat(nMesh2_node) ;

Mesh2_poly_lat:standard_name = "latitude" ;

Mesh2_poly_lat:long_name = "latitude of 2D mesh polygons, e.g. center of gravity" ;

Mesh2_poly_lat:units = "degrees_north" ;

Begrenzung für Kanten

double Mesh2_edge_lon_bnd(nMesh2_edge,Two) ;

double Mesh2_edge_lat_bnd(nMesh2_edge,Two) ;

Begrenzung für Polygone

double Mesh2_poly_lon_bnd(nMesh2_poly,Three) ;

double Mesh2_poly_lat_bnd(nMesh2_poly,Three) ;

Topologische Daten

Knotenverzeichnis der Kanten

integer Mesh2_edge_nodes(nMesh2_edge,Two) ;

Mesh2_edge_nodes:standard_name = "???" \\ yet to be determined

Mesh2_edge_nodes:long_name = "list of nodes for all edges, start node - end node"

Knotenverzeichnis der Polygone

integer Mesh2_poly_nodes(nMesh2_poly,Three) ;

Mesh2_poly_nodes:standard_name = "???" \\ yet to be determined

Mesh2_poly_nodes:long_name = "list of nodes for all polygons, counterclockwise"

Polygonverzeichnis der Kanten

integer Mesh2_edge_polys(nMesh2_edge,Two) ;

Mesh2_edge_polys:standard_name "???" \\ yet to be determined

Mesh2_edge_polys:long_name = "list of (adjacent) polygons for all edges - left and right neigbour polygon"

Mesh2_edge_polys:_FillValue = fillvalue \\ indicates missing neighbour polygon, e.g. at domain boundaries

Topologievariable

integer Mesh2 ;

Mesh2:standard_name = "???" \\ yet to be determined ;

Mesh2:long_name = "could be used to store a name for the grid" ;

Mesh2:dimensionality = 2 ; \\ flat mesh, no three-dimensional elements;

Mesh2:locations = "node edge poly" \\ data can be assigned to these locations ;

Mesh2:node_coordinates = "Mesh2_node_lon Mesh2_node_lat" ;

Mesh2:edge_coordinates = "Mesh2_edge_lon Mesh2_edge_lat" ;

Mesh2:poly_coordinates = "Mesh2_poly_lon Mesh2_poly_lat" ;

Mesh2:poly_node_connectivity = "Mesh2_poly_nodes" ;

Mesh2:edge_node_connectivity = "Mesh2_edge_nodes" ;

Mesh2:edge_poly_connectivity = "Mesh2_edge_polys" ; \\ different name used compared Deltares

Koordinatentransformation

integer crs ; \\ value is equivalent to the EPSG code of the transformation

crs:grid_mapping_name = "transverse_mercator" ;

crs:scale_factor_at_central_merdian = value ;

crs:longitude_of_central_meridian = value ;

crs:latitude_of_projection_origin = value ;

crs:false_easting = value ;

crs:false_northing = value ;

Anmerkungen, Fragen

• Datei ist nicht vollständig CF-konform - Deltares-Erweiterungen werden benutzt!
• Sollen für Polygone und Kanten eventuell auch bounds angegeben werden?
• Die Beschreibung der Koordinatentransformation ist für UTM- und Gauß-Krüger-Koordinaten geeignet.

---

zurück zu NetCDF

---

Strukturübersicht